Plastitube Plastic

The Ezytube Spiral Tube Formliner is a light weight, extremely strong tubing suitable for forming typical pour in place round concrete columns.

The simplicity in the Ezytube spiral formatube is that it ensures extremely high burst strength at very thin wall thickness, which results in a lightweight formatube, which is easy to cut to remove after pouring, and can be poured in most cases at unrestricted pour rates. (check with the appropriate data sheet for maximum unrestricted pour heights for all column diameters)

Ezytube spiral formatubes can be manufactured in a range of diameters from 200mm to 990mm in 50mm intervals (some states may have less diameters) and up to almost any transportable length.

Ezytube is manufactured using a spiral winding technique, and as such results in a slight, even spiral seam on the inside surface of the tube.

After pouring concrete within the plastitube plastic, the surface of the concrete column shall reflect this spiral seam on the outer surface of the concrete. Class 2 -3 finishes are created with spiral Ezytube forms.

The Semi flexible wall structure means that the tube wall is forgiving and has high resistance to impact; the tube will “spring” back to shape if “out of round” after transport or other form of compression.

Easily cut with a knife

Our Spiral tubes are simple to cut for onsite projections, conduits, etc… No electric power tools are required to strip, no risk of electrocution from power tools, giving obvious Occupational Health and Safety advantages.

Call Us for more information.